Pronto® Extraction Catheters

Pronto® V4 Extraction Catheter

Powerful aspiration with kink resistance

The Pronto® V4 Extraction Catheter features an uniformly large extraction lumen and patented Silva tip and provides excellent aspiration performance.1 The Pronto® V4 Extraction Catheter is available in 5.5, 6, 7 and 8 Fr. sizes, each featuring an embedded longitudinal wire for kink resistance and enhanced pushability.

  • PTFE lined guidewire lumen for smooth movement and rapid exchange catheter delivery over a 0.014” guidewire
  • Sloped extraction lumen opening is designed to aspirate larger thrombi
  • Hydrophilic coating on the distal 18 cm promotes smooth vessel navigation and trackability
  • Uniformly large extraction lumen is designed to maximize thrombus extraction
  • Embedded longitudinal wire enhances deliverability and kink resistance

Pronto® V3 Extraction Catheter

Deliverability in design

The Pronto® V3 Extraction Cather is specially designed for deliverability during percutaneous thrombus aspiration with a self-centering tip to help prevent vessel wall adhesion. The full-length braided shaft enhances pushability and kink resistance while maintaining flexibility. This combination offers impressive deliverability when and where it’s needed most.

  • PTFE lined guidewire lumen for smooth movement and rapid exchange catheter delivery over a 0.014” guidewire
  • Hydrophilic coating on the distal segment promotes smooth vessel navigation and trackability
  • Uniformly large extraction lumen is designed to maximize thrombus extraction

Pronto® LP Extraction Catheter

Low-profile aspiration The Pronto® LP Extraction Catheter combines the extraction power of the Pronto® V4 Extraction Catheter in a low, 0.053” crossing profile for use in vessels ≥1.5 mm in diameter.

  • Two versions available for both 5 and 6 Fr. guide catheters
  • PTFE lined guidewire lumen for smooth movement and rapid exchange catheter delivery over a 0.014” guidewire
  • Sloped extraction lumen accommodates larger thrombi
  • Distal hydrophilic coating for lubricious delivery and smooth navigation
  • Preloaded stylet can easily be removed for aspiration through a separate port, and offers pushability and kink resistance during delivery

Pronto® .035" Extraction Catheter

10 Fr. power in aspiration

A complete system for the rapid removal of thrombus from vessels of the peripheral arterial or deep venous system greater than 4 mm in diameter.

  • Maximized thrombus aspiration with rate control —unobstructed aspiration lumen with an in-line roller clamp to control the rate of aspiration
  • Braid reinforced extrusion ­— resists kinking over entire length of catheter and increases tip control
  • 120˚ angle with 4 cm tip ­— enhances steerability and vessel selection and allows for rotational control of aspiration lumen in large vessels
  • Easy over-the-wire delivery — compatible with standard 0.035” guidewires
  • 10 Fr. sheath compatible

References:

  1. Data on file at Teleflex. Test data may not be indicative of clinical performance.
The Pronto® V4, V3 and LP Catheters are indicated for the removal of fresh, soft emboli and thrombi from vessels in the coronary and peripheral system.

The Pronto® .035" Catheter is indicated for the removal/aspiration of embolic material (thrombus/debris) from vessels of the arterial system, the removal/aspiration of embolic material (thrombus/debris) from vessels of the deep venous system, and to infuse/deliver diagnostic or therapeutic agents.

Refer to the Instructions for Use for a complete listing of the indications, contraindications, warnings and precautions. Information in this material is not a substitute for the product Instructions for Use.

CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician.

Teleflex, the Teleflex logo and Pronto are trademarks or registered trademarks of Teleflex Incorporated or its affiliates, in the U.S. and/or other countries. MC-005112